Razorweld KUMJRRW145 Скачать руководство пользователя страница 32

Страница: 32 / 52

LIFT ARC DC TIG Operation for RAZOR 210

Lift Arc ignition allows the arc to be started easily in DC TIG by simply touching the tungsten to the

work piece and lifting it up to start the arc. This prevents the tungsten tip sticking to the work piece and

breaking the tip from the tungsten electrode. There is a particular technique called “rocking the cup” used in

the Lift Arc process that provides easy use of the Lift Arc function.

(7) Carefully open the valve of the gas cylinder, set the flow to 21-30cfh

(8)

Set the welding current using the amperage control dial

(9) Make sure the front end parts of the tig torch are correctly assembled, use the correct size and type of

tungsten electrode for the job, the tungsten electrode requires a sharpened point for DC welding.

(10) Lay the outside edge of the Gas Cup on the work piece with the Tungsten Electrode 1/16 inm from the

work piece. Press the trigger button on TIG torch to start the gas flow.

(11) With a small movement rotate the Gas Cup forward so that the Tungsten Electrode touches the work

piece.

(12) Now rotate the Gas Cup in the reverse direction to lift the Tungsten electrode from the work piece to

create the arc.

(10) Lay the outside edge of the Gas Cup on

the work piece with the Tungsten Electrode

1/16infrom the work piece. Press the trigger

button on TIG torch to start the gas flow.

(11) With a small movement rotate the Gas Cup

forward so that the Tungsten Electrode touches

the work piece.

(12) Now rotate the Gas Cup in the reverse

direction to lift the Tungsten electrode from the

work piece to create the arc.

(9) Assemble front end parts of the TIG torch,

fitting a sharpened tungsten suitable for DC

welding.

(8) Set the welding current using

the amperage control dial

(7) Carefully open the valve of the gas

cylinder, set the flow to 6-10 l/min

Содержание KUMJRRW145





















































Результаты поиска

Содержание KUMJRRW145

Отзывы:

Похожие инструкции для KUMJRRW145

Бренды по названию

Популярные бренды

Razorweld KUMJRRW145, Руководство по эксплуатации

Результаты поиска

Содержание KUMJRRW145

Отзывы:

Похожие инструкции для KUMJRRW145

Бренды по названию

Популярные бренды