4
Need Help?
Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
PRE-RIDE CHECKLIST
PRE-RIDE CHECKLIST
Deck and Handlebars
Check for cracks or broken connections. Although broken decks
are rare, it is possible for an aggressive rider to run into a curb
or object and wreck and bend or break the deck. Get in the habit
of inspecting your scooter on a regular basis.
Hardware/Loose Parts
Check and secure all fasteners before every ride. Make sure the
collar clamp is locked properly into place before riding.
There should not be any unusual rattles or sounds from loose
parts or broken components. If the unit is damaged, do not ride.
Reference “Safety Warnings” on page 1 of this manual.
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always wear
closed toe shoes (lace-up with rubber soles) and keep shoelaces
tied and out of the way of the wheels. NEVER RIDE BAREFOOTED
OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Be Careful!
This product is not for aggressive or trick riding. Avoid steep
inclines and don’t ride too fast — you can lose control and fall.
Skateboard parks are not designed for young riders. Never ride in
traffic or on the street and watch your surroundings for pedestrians,
bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
USAGE
How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer with both hands on the handlebars. For
enhanced cornering, lean slightly into the direction of the turn.
Gently step on the LED light button to activate the LED lights. Lights will remain on for approximately 20 seconds after
button has been released. Gently step on the LED light button again to re-activate the lights.
How to Stop
For controlled stops, apply the brake by stepping on the brake. Razor recommends that you practice applying the brake
at various speeds and in an open area free from obstructions before riding your Razor scooter around others.
