Razor Rebellion Electric Chopper 15130760, Руководство пользователя

Страница: 8 / 17

7
REPAIR AND MAINTENANCE
Battery Care and Disposal
Do not store the battery in temperatures above 75° or below -10° F.
CONTAINS SEALED LEAD BATTERY. BATTERY MUST BE RECYCLED.
Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an
environmentally sound manner. Do not dispose of a lead-acid battery in a fi re. The battery may explode
or leak. Do not dispose of a lead-acid battery in your regular household trash. The incineration, land fi lling
or mixing of sealed lead-acid batteries with household trash is prohibited by law in most areas. Return
exhausted batteries to a federal or state approved lead-acid battery recycler or a local seller of automotive
batteries. If you live in Florida or Minnesota, it is prohibited by law to throw away lead-acid batteries in the
municipal waste stream.
Charger
The transformer/charger supplied with the chopper should be regularly examined for damage to the cord,
plug, enclosure and other parts, and, in the event of such damage, the bike must not be charged until it
has been repaired or replaced.
Use ONLY with the recommended charger.
Replacement Parts
The most frequently requested replacement parts (wheels, tires, tubes, batteries and chargers) are
available for purchase at some Razor retail partners or online at www.razorama.com. For other parts
contact an authorized Razor repair center.
Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Send e-mail to customerservice@razorusa.com or call 866-467-2967 for the center nearest you.
WARNING: If a battery
leak develops, avoid contact
with the leaking acid and place
the damaged battery in a plastic
bag. Refer to the disposal
instructions at left. If acid comes
into contact with skin or eyes,
fl ush with cool water for at
least 15 minutes and contact a
physician.
Chain and Tire Replacement – Rebellion Chopper
1
Loosen screw and remove
chain guard.
2
Loosen the rear axle by
attaching wrenches to both axle
nuts and loosening counter-
clockwise.
3
Slide the wheel forward to
slacken the chain and disengage
the chain from the wheel sprocket
and motor sprocket.
(Note: Your hands will get greasy
doing this.)
4
Remove wheel and replace
chain or tire. To reinstall wheel,
reverse these steps.
q
Battery Care and Disposal Battery Care and Disposal
q
Charger Charger
q
Replacement Parts Replacement Parts
q
Repair Centers Repair Centers