Installation Instructions
e
LEG
www.Razorinternational.com
Page 4 of 8
6. Then connect the drive unit to the battery harness via the harness supplied.
Secure and protect the wiring as appropriate to minimise damage
7. Finally, locate a solid point
on the trailer chassis to
mount the eLEG manual handle
with hardware. Drill two
off 9mm (3/8'') diameter holes
using the bracket as a template
and bolt the handle bracket to
the trailer chassis.
Then lock manual handle with L bolt and clip into the hanger clip.
-ve
+ve
Brown Wire Tve
(clearance
light)
Blue Wire Tve
(auxillary)
White Wire Trailer
–
ve
(earth)
Charger
Leg
Drive
12V Battery
Electrical Schematic
30 amp fuse
hanger
clip
L bolt
handle
bracket
eLEG
manual
handle
