Razor E300 HDL Скачать руководство пользователя страница 4

SAFETY WARNINGS

22

away from small children and remember that this product is not a toy and 

is intended for use only by persons who are, at a minimum, completely 

comfortable and competent while operating the product.
Razor recommends that children under the age of 18 not be permitted to 

use this product. This recommendation is based not just on age or weight 

or height; it reflects consideration of expected maturity and skills as well 

as physical size. The recommended rider age of 18 years or older is only an 

estimate and can be affected by the rider’s size, weight, or skills – not every 

rider 18 years old or older will be suited to the product. Certainly, any rider 

unable to fit comfortably on the E300 HDL should not attempt to ride it, but 

a parent’s decision to allow his or her child to ride this product 

should be based on the child’s maturity, skill, and ability to follow 

rules. Razor emphasizes that adults are strongly advised not to 

disregard Razor’s recommendations or permit younger children to 

ride the E300 HDL.
Keep this product away from small children and remember that it 

is not a toy and is intended for use only by persons who are, at a 

minimum, completely comfortable and competent while operating.

Persons with any mental or physical conditions that may make them 

susceptible to injury, impair their physical dexterity or mental capabilities 

to recognize, understand, and follow safety instructions and to be able to 

understand the hazards inherent in the use of any ride-on product, should not 

use or be permitted to use products inappropriate for their abilities. Persons 

with heart conditions, head, back or neck ailments (or prior surgeries to these 

areas of the body), or pregnant women, should be cautioned not to operate 

such products.

DO NOT EXCEED THE WEIGHT LIMIT OF 220 lb (100 kg). Rider weight 

does not necessarily mean a person’s size is appropriate to fit or 

maintain control of the E300 HDL.
CHECK AND MAINTAIN PRODUCT CONDITIONS

Before use, check to confirm that covers and guards are in place and in 

serviceable condition. Check that the brake and lights are functioning 

properly, that the front tire is inflated properly and has sufficient tread 

remaining and that the rear wheel is free of flat spots from wear. The 

product should be maintained and repaired in accordance with the 

manufacturer’s specifications, using only the manufacturer’s authorized 

replacement parts, and should not be modified from the manufacturer’s 

original design and configuration.

ACCEPTABLE RIDING PRACTICES AND CONDITIONS

Do not activate the throttle unless you are on the E300 HDL and in a safe, 

outdoor environment suitable for riding. 

The electric scooter must be 

moving at least 3 mph (5 km/h) before the motor will engage. 

Once 

the throttle is activated the E300 HDL will move forward.
The normal powered top speed of this product will be approximately 15 mph 

(24 km/h), which can be affected by conditions, such as rider weight, inclines 

and battery charge level. Avoid excessive speeds that can be associated with 

downhill rides.
Maintain a hold on the handlebars at all times. Do not touch the brake or 

motor on your scooter when in use or immediately after riding, as these parts 

can become very hot.
Ride defensively. Watch out for potential obstacles that could catch your 

wheel or force you to swerve suddenly or lose control. Be careful to avoid 

pedestrians, skaters, skateboards, scooters, bikes, children or animals who 

may enter your path, and respect the rights and property of others.
The E300 HDL is intended for use on flat, dry surfaces, such as pavement or 

level ground, without loose debris, such as sand, leaves, rocks or gravel. Wet, 

slick, bumpy, uneven or rough surfaces may impair traction and contribute to 

possible accidents. Do not ride your product in mud, ice, puddles or water. 

Watch out for potential obstacles that could catch your wheel or force you 

to swerve suddenly or lose control. Avoid sharp bumps, drainage grates, and 

sudden surface changes.
Do not attempt or do stunts or tricks. The E300 HDL is not made to withstand 

abuse from misuse, such as jumping, curb grinding or any other type of 

stunts. Racing, stunt riding, or other maneuvers also enhance risk of loss of 

control, or may cause uncontrolled rider actions or reactions.
Never allow more than one person at a time to ride the product.
Riding at night or when visibility is limited increases risks of accident or 

injury. Should the E300 HDL scooter be ridden in such conditions, use 

of lights and additional measures to increase rider visibility and scooter 

conspicuity are advised.
Never use near steps or swimming pools.
Do not allow hands, feet, hair, body parts, clothing, or similar articles to come 

in contact with moving parts or wheels while the motor is engaged.
Do not touch electric motor or brake when in use or immediately after riding.
Never use headphones or a cell phone to talk or text when riding.

Never ride your product while under the influence of drugs 

or alcohol.

Never hitch a ride with a vehicle.

PROPER RIDING ATTIRE

Always wear proper protective equipment, such as an approved safety 

helmet (with chin strap securely buckled), elbow pads, and kneepads. A 

helmet may be legally required by local law or regulation in your area. A 

long-sleeved shirt, and long pants are recommended. Always wear shoes and 

keep shoelaces tied and out of the way of the wheels and motor. Never ride 

barefooted or in sandals.

USING THE CHARGER

The charger supplied with the product should be regularly examined for 

damage to the cord, plug, enclosure and other parts. In the event of such 

damage, the product must not be charged until the charger has been repaired 

or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from product when not in use.
Always disconnect from the charger prior to wiping down and cleaning your 

product with damp cloth.

FAILURE TO USE COMMON SENSE AND HEED THE ABOVE 

WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE 

AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS 

ATTENTION TO SAFE OPERATION. USE CAUTION.

Содержание E300 HDL





















Отзывы: