3
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Charger
(Note: Charger design may
vary from one shown)
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents that may have occurred during shipping. Because
your scooter was partially assembled and packed at the factory, there should not be any problems, even if the box
has a few scars or dents.
MAKE SURE POWER BUTTON IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 5 minutes for assembly, not including initial charge time.
Allow up to 5 hours for charge
(see page 6 for charging information).
WARNING:
DO NOT USE NON-RAZOR PARTS
WITH YOUR SCOOTER. Razor
scooters have been built to certain
Razor design specifications. The
original equipment supplied at the
time of sale was selected on the
basis of its compatibility with the
frame and all other parts. Certain
aftermarket components may not
be compatible. Use of non-Razor
parts will void the warranty.
Note: Electric scooter must
be moving at least 3 mph
(5 km/h) while applying
throttle to engage motor.
Product ID Locations:
(See locations to the left)
1. Underneath Product
2. Charger
3. UPC Side of Box (Not Shown)
Box Contents:
• E Prime Air
• Charger
• Owner’s Manual
• Allen Wrench
Required Tool
Electronic Brake
2.
Quick-Release Lever
ON/OFF Button & LED Indicator
Power Cutoff Fender Brake
Kickstand
Charger Port
1.
Hub Motor
Anti-Rattle Folding Mechanism
Pneumatic Tire
Extension Tube
Collar Clamp
Throttle
5 mm Allen Wrench
(Included)
