background image

Insert and secure the left and right handlebars 

by pressing the spring-loaded buttons and 
inserting them into the T-bar.

Make certain 

BOTH 

handlebars are properly 

locked onto the T-bar.

3

ASSEMBLY AND SET-UP

WARNING:

  

Keep fingers clear of the pivoting 

mechanism when folding or 

unfolding the scooter. Make sure 

others are standing clear.

 Unfolding the Scooter for First Time Use

1

 To release the folding mechanism, place the 

scooter on the ground, put one foot on the deck 
plate and pull the Anti-Rattle knob up.  
Raise T-bar up until it is securely locked in the 
upright position. 

Note: 

To activate the anti-rattle feature twist the knob to the right to tighten. Please note there is no need 

to over tighten. 

Note: 

The Anti-Rattle knob is spring-loaded and 

will automatically lock in the upright position 
when fully upright.

WARNING: 

Failure to 

properly engage the spring-loaded 

buttons may cause the handlebars 

to dislodge while riding and may 

cause you to lose control and 

fall. When correctly engaged the 

handlebars will not rotate nor will 

they move sideways. Note that 

when properly engaged, the spring-

loaded buttons are clearly visible in 

the holes on the T-bar.

Содержание A5 DLX













Отзывы: