With the scooter in the upright and locked position, using a 3mm Allen wrench, adjust the set screw at the baseboard
until there is no free-play between the baseboard and the steering column. Be careful not to over-tighten this screw as
it only needs to be snug against the steering column. Verify the adjustment by releasing the steering column from the
locked position and folding the scooter. The locking lever should not bind and the folding movement should be smooth.
The spring-loaded mechanism should automatically lock and be fully seated in the upright position.
Baseboard/Steering Column Adjusting Screw(s).
Wheels and Bearings
Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it
is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper
tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an
indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Worn
wheels and bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other
than genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genuine
Razor replacement parts may affect your safety and will void your warranty.
Cleaning your Scooter
Wipe with a damp cloth to remove dirt and dust.
Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or am-
monia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive.
How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer.
For enhanced cornering, lean slightly into the direction of the turn.
For controlled stops, apply the brake by stepping on the rear fender/brake. Razor recommends that you practice
applying the brake at various speeds and in an open area free from obstructions before riding your Razor around others.
WARNiNg:
Wheelies
and other stunt-type riding reduces
your ability maneuver and control
your scooter. Take the necessary
precautions, such as wearing
appropriate protective gear and
practice in a area safe for stunt
riding and free from obstructions.
4
WARNiNg:
Keep
your fingers clear of the pivoting
mechanism when folding or
unfolding the scooter.
CHECk BEFORE RiDiNg
