2.13
Pelvic Positioning Strap
An optional two-piece Pelvic Positioning Strap can be ordered with the
shower chair and can be attached to any Raz Model. The pelvic strap
uses 2” wide heavy-duty webbing and a buckle for one-handed
operation.
To install the Pelvic Positioning Strap:
1. Weave one strap end through a DD-ring and slide the ring
several inches from the end.
2. Feed the strap through the slot in the triangular strap plate –
from the inside to the outside
and then weave the loose end
back through the DD-ring.
3. Repeat steps 1 and 2 for the other side of the strap.
4. Adjust the DD-rings and tighten the pelvic strap as necessary.
To adjust the Pelvic Positioning Strap:
1. Loosen both straps through the “double D” ring on one side of
the pelvic strap.
2. Adjust by pulling/pushing the strap end in/out of the DD-ring.
3. Repeat step 2 for the other side of the strap.
4. Pull tightly on each strap to ensure that it is secured properly.
2.14 H-Strap
An optional one-piece H-Strap can be attached to the footrests on any
Raz Model. The H-Strap is recommended for individuals who require
additional support for the legs and feet.
To install the H-Strap:
1. With the Velcro facing towards the chair, center the strap
horizontally between both footrest hanger tubes and wrap the
loop side around the tubes until it engages with the hook side.
To adjust the H-Strap:
1. Disconnect the Velcro from the back of the H-strap and adjust
to sling or tighten the H-Strap to suit the user’s needs.
2. Press firmly on the Velcro to secure the H-Strap prior to use.
2.15
Heel Loops
Heel Loops can be attached to one or both footrests on any Raz
Shower Chair. They provide added support, positioning, and comfort
for the user.
2.16
Commode Pan
The Raz Commode Pan was designed with an elongated form that fits
directly under the seat to minimize backspray. A unique splash-
reduction ridge is located at center of the pan. The high gloss surface
facilitates cleaning and rinsing, while the pouring spout and handle
facilitate emptying the contents. Removal of the Commode Pan is
achieved by sliding the pan rearward.
NOTE: When re-inserting the pan, ensure that the pan clicks into the
stainless steel brackets and is centered under the seat aperture
.
If the
brackets do not hold the pan under the seat securely, squeeze the
metal brackets inward for realignment.
Raz AP600/SP600 User’s Manual
20090122
13
