RAYZ Rally Pro SP-01, Руководство пользователя

Страница: 32 / 33

End-of-Life Battery Removal Instructions
These instructions are for qualified personnel only at a waste processing
facility. These instructions are not intended for end users.
1) Remove the soft rubber material on the back of the unit. Use a fingernail or
wooden prying tool on a corner and then slowly peel it off diagonally.
2) Remove the rigid plastic material on the back of the unit using a similar
process as above.
3) Unscrew the eight screws with a T8 screwdriver and gently lift up the rear
housing from the main housing.
4) Looking inside, on the bottom right of the circuit board there is a white
connector with red, yellow and black wires. Gently unplug that connector
5) Remove the battery which is located on the underside of a plastic plate
below the speaker driver.
6) Use a wooden or plastic tool to carefully pry the battery from the plastic
plate without deforming the battery.
battery at the time of disposal will help conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment.
European Union — Disposal Information
The symbol to the right means that according to local laws and
regulations your product and/or its battery shall be disposed of
separately from household waste. When this product reaches its end
of life, take it to a collection point designated by local authorities.
The separate collection and recycling of your product and/or its
This device operates at 2402 MHz to 2480 MHz with an RF Output Power
(EIRP) of +4 dBm (2.5mW).
CE DECLARATION OF CONFORMITY (EUROPEAN UNION)
Appcessori Corporation hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU, Directive 2014/35/EU, Directive 2009/125/EC, and Directive
2011/65/EU as amended by (EU) 2015/863. The Declaration of Conformity may
be obtained from:
Company: Appcessori Corporation
Address: 915 Broadway St Ste 258
Vancouver, WA 98660, USA