V1.0
RayToos AG. © Copy Right
www.raytools.ch
BM110 SERIES (Chinese Model) 3.3KW Auto Focus Laser Cutting Head
-
User Manual
10 | 20
3.1.2
Interface Operation
1.
Move J axis to check if the action is normal (“thread pitch” and direction), J+ indicates
scale 0+.
2.
Slowly moving the J axis so that it meets the positive and negative limit, check whether
the direction and limit signal are normal or not.
3.
By click homing icon, J axis moves to negative direction and do 2
nd
homing when
touches negative limit. In this case the position of zero point coincides with zero focal
position. The homing is finished.
Note:
1.
Click+, the lens holder moves upward. When it touches positive limit, click
-
, then lens
Figure 4.6— Operation
interface
