Raytheon Beech Bonanza A36, Руководство по эксплуатации и полетной документации для пилотов

Страница: 251 / 594

Handling, Serv & Maint Model A36
Section 8
8-26
Prior to cleaning, cover the wheels, making certain the brake
discs are covered. Attach the pitot cover securely and plug or
mask off all other openings. Be particularly careful to mask off
all static air buttons before washing or waxing. When cleaning,
use special care to avoid removing lubricant from lubricated
areas.
Hand washing may be accomplished by flushing away loose
dirt with clean water, then washing with a mild soap and water,
using soft cleaning cloths or a chamois. Avoid harsh, abrasive,
or alkaline soaps or detergents which could cause corrosion or
scratches. Thorough clear-water rinsing prevents buildup of
cleaning agent residue, which can dull the paint’s appearance.
To remove oily residue or exhaust soot, use a cloth dampened
with an automotive tar remover. Wax or polish the affected
area if necessary.
Do not expose control surface trim tab
hinge lines and their pushrod systems to
the direct stream or spray of high-pressure
soap-and-water washing equipment. Fluid
dispensed at high pressure could remove
the protective lubricant, allowing moisture
from heavy or prolonged rain to collect at
hinge lines, and then to freeze at low tem-
peratures. After high-pressure or hand
washing, and at each periodic inspection,
lubricate trim tab hinge lines and trim tab
pushrod end fittings (Brayco 300 per Fed-
eral Specification VV-L-800 preferred). See
the
Bonanza Series Maintenance Manual .
When using high-pressure washing equipment, keep the spray
or stream clear of wheel bearings, propeller hub bearings, etc.
Openings such as pitot tubes, static air buttons, and battery
and avionics equipment cooling ducts should be securely cov-
January, 2006