3
Preparing Cabinet Opening
Dishwasher is designed to fit into a minimum 34 1/2"
height and 24" width and depth. A minimum of 2" is
required between dishwasher and perpendicular
cabinet or wall. Dishwasher must not be installed more
than 10' from sink for proper drainage.
Important
Complete enclosure is not provided with dishwasher.
Installer must provide top, bottom, back and side
enclosures.
Preparing Electrical Wiring
WARNING
To avoid electrical shock which can cause
severe personal injury or death, open
household circuit breaker to dishwasher
before installing or servicing dishwasher.
After installing or servicing dishwasher,
reconnect power.
Important
Electrical wiring must meet local codes and
ordinances. If wiring does not, contact a licensed
electrician.
1.
Cut 1 1/2" maximum hole in cabinet for cable or
power cord. Wiring must enter within shaded
area.
2.
Connecting Dishwasher Using Cable
Direct Connection
Route cable as shown. Cable must extend a
minimum of 24" from back wall of cabinet.
Connecting Dishwasher Using Power
Cord
Install a three-prong grounded receptacle
in rear of sink cabinet next to dishwasher.
Do not install receptacle in cabinet opening.
Receptacle must be installed at least 6" but not
more than 18" from cabinet opening.
5"
5"
4"
4"
6"
Receptacle
3"
Alternate
Receptacle
Electrical Wiring
Important
Edges of cabinet opening for power cord must be
smooth and rounded. If cabinet is metal, edges of
opening must be covered with a rubber cord protector.
