Raytheon Anschütz STD 22 Compact GYRO COMPASS, Инструкция по установке и обслуживанию

Страница: 3 / 237

Compass
Installation and Service manual
STD 22
Compass STD 22
Compass STD 22 Compact
I
Edition: Sept. 13, 2005
3646/110--233.DOC010302
CONTENTS Page
Declaration of Conformity
Safety notes 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 General information 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 CAN bus (CAN = Controller Area Network) 13 . . . . . . . . . . . . . . . . . . .
2 Preparing to install the STD 22 Compact Gyro Compass 15 . . . .
2.1 STD 22 Compact Compass – Scope of Supply 15 . . . . . . . . . . . . . . . .
2.2 General information concerning installation
of the STD 22 Compact Compass 16 . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Creating cable connections 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.1 General information concerning on-board wiring 17 . . . . . . . . . . . . . . .
2.3.1.1 General information about creating an earth connection 20 . . . . . . . .
2.4 Installing the compass and putting it into operation 21 . . . . . . . . . . . . .
2.4.1 Remove the transportation support with outer sphere,
supporting liquid and distilled water. 21 . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4.1.1 Assembling the compass enclosure 22 . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4.1.2 Installation of the gyrosphere 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4.1.3 Filling with distilled water and supporting liquid 27 . . . . . . . . . . . . . . . .
2.4.1.4 Inserting the outer sphere in the compass enclosure 29 . . . . . . . . . . .
2.5 Creating cable connections and plug connections 31 . . . . . . . . . . . . . .
2.5.1 Overview of plug connections and fuses on PCB‘s 31 . . . . . . . . . . . . .
2.5.1.1 Connecting the course receiver
in the STD 22 Compact Gyro Compass 33 . . . . . . . . . . . . . . . . . . . . . . .
2.5.1.2 Connecting status and control signal outputs
in the STD 22 Compact Gyro Compass 35 . . . . . . . . . . . . . . . . . . . . . . .
2.5.1.3 Connecting signal inputs for QS and SEC
in the STD 22 Compact Gyro compass 37 . . . . . . . . . . . . . . . . . . . . . . .
2.5.1.4 Connecting the power supply cable 39 . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5.1.5 Connecting the compass to earth 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6 Installation and commissioning of optional features 41 . . . . . . . . . . . .
2.6.1 Installation and commissioning of
the Additional Output Box 143--103 41 . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6.2 Installation and commissioning of the AC/DC Converter 121--062 43
2.6.3 Installation and commissioning
of the Operator Unit Quick Settling (QS) 130--606 46 . . . . . . . . . . . . . .
2.6.3.1 Installing the Operator Unit Quick Settling 47 . . . . . . . . . . . . . . . . . . . .
2.6.4 Switching on, settling and adjustment 49 . . . . . . . . . . . . . . . . . . . . . . . .
2.6.4.1 Switching on the compass 49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6.4.2 Checks on the compass 49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6.4.3 Setting the STD 22 Compact Compass into operation 51 . . . . . . . . . .
2.6.4.4 Setting the compass zero (reference course) 53 . . . . . . . . . . . . . . . . .
2.6.4.5 Reading the alignment error 55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6.4.6 Setting Channel 1 and Channel 2 56 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6.4.7 Setting the information source for Speed Error Correction 59 . . . . . . .
2.6.4.8 Adjustment of essential operating modes 63 . . . . . . . . . . . . . . . . . . . . .
2.6.4.9 Function check on externally connected course receivers 70 . . . . . . .