Raytheon Anschütz STD 22 Compact GYRO COMPASS, Инструкция по установке и обслуживанию

Страница: 114 / 237

Installation and Service manual
Compass STD 22
104 Edition: May 20, 2005 3646/110--233.DOC010302
3.4.3.5 Setting the CAN bus address
Every CAN bus user must be reachable via an address.
This address may be assigned in the CAN bus system only once.
In the gyro compass, this address is set with the DIP switch.
The CAN bus address for compasses can be set within a range from 10
(10)
to 19
(10)
.
The address 00
(10)
may not be used.
Indications Comments, Information
Switch B 37 (DIP switch)
1 2 3 4 5 6 7 8
OPEN
OFF
ON
B38
B39
each time pressed
changes downwards
each time pressed
changes upwards
Below mentioned table shows the agreement for the CAN bus addresses within a
compass system.
Device(s) CAN--Bus--Address
Operator Units 01 to 09
Sensors
(GPS--compass)
10 to 13
Sensors
(Gyro Compass)
14 to 19
Distribution Units 20 to 29