Raytheon Anschütz 108-010.NG001 E01 страница 54 Скачать руководство пользователя

Страница: 54 / 80

Magnetic Sonde

8 Transport and Storage

4423

Edition:003

Transport and Storage

8.1

Preservation, Packing and Storage

Preservation

All components / devices require no special preservation procedures.

Packing

All components / devices are packable in customary packing. Take special care when

packing electrostatic sensitive devices.

CAUTION!

Hazard to electrostatic sensitive device

Risk of material damage
• Take protective measures during installation and/or calibration.

• Pack device in suitable ESD packing for storage and transport.

Storage

During the storage of the components / devices, the following conditions have to be met:
• Store the equipment dry and dirt-/dust-free

• Protect the equipment by corresponding packing material against damage

• Do not stack the components / devices

• No special storage regulations are applicable

• Adhere the following environmental conditions:

Storage temperature

-30 °C to +70 °C

Humidity

<80% relative humidity, noncondensing

Atmospheric pressure

600 hPa to 1.400 hPa

8.2

Transport

During the transport of the components / devices, the following regulations have to be met:
• Protect the equipment by corresponding packing material against damage.

• Protect the equipment against dirt and dust by suitable means.

• Handle the equipment carefully by suitable means.

• Adhere the following environmental conditions:

Transport temperature

-30 °C to +70 °C

Humidity

<80% relative humidity, noncondensing

Atmospheric pressure

600 hPa to 1.400 hPa

• No special transport regulations are applicable.

Содержание 108-010.NG001 E01

















































































Результаты поиска

Содержание 108-010.NG001 E01

Отзывы:

Похожие инструкции для 108-010.NG001 E01

Бренды по названию

Популярные бренды

Raytheon Anschütz 108-010.NG001 E01, Руководство оператора и по обслуживанию

Результаты поиска

Содержание 108-010.NG001 E01

Отзывы:

Похожие инструкции для 108-010.NG001 E01

Бренды по названию

Популярные бренды