Raytheon Anschütz 108-010.NG001 E01, Руководство оператора и по обслуживанию

Страница: 52 / 80

Magnetic Sonde
7 Installation and Maintenance
4423 42 Edition:003
Procedure
Fig. 17: Replace Junction Box
1 Junction Box
2 Cover
3 Screw
1. Disconnect the junction box ( Fig. 17 /1) from the magnetic sonde and the connected
system or equipment.
2. Loosen the 4 screws ( Fig. 17 /3).
3. Remove the cover ( Fig. 17 /2).
4. Remove the 2 screws fixing the junction box.
5. Remove the junction box (
Fig. 17 /1).
6. Provide a new junction box.
7. Dispose of the defective junction box.
8. Loosen the 4 screws (
Fig. 17 /3) of the new junction box.
9. Remove the cover ( Fig. 17 /2).
10.Install the junction box with 2 suitable screws.
11.Connect the magnetic sonde to the new junction box.
12.Connect the cable of the responding system or equipment to the terminal strip, see
attached wiring diagram.