RSSD AR
-
727H MANUAL 29
NODE ID SETTINGS
NODE ID SETTINGS
NODE ID SETTINGS
NODE ID SETTINGS
Enter Programming Mode
or
Use F1 or F2 to scroll to
and press
Use F1 or F2 to scroll to
and press
The Display will show:-
Enter the required Node ID number and press
The Display will now show:-
Enter Number required.
The Display will show:-
Input the Door Number and press
This is the Hardware number of the Controller, each
Controller must have a different number.
This is usually the same as Door Num: L below.
The Display will show:-
Input the Door Number and press
This is the Door number. For all the doors to show different
numbers in the software, this must be different for each door.
This is usually the same as Door Num: H above.
The Display will show
Setting Node ID for Networked Controllers
*123456#
*MASTER CODE#
3. Parameters (1)
1. Node ID
#
#
Input New Node ID
Range: 001 ~ 254
Current Data: 001
#
Show Card ID ?
1: No 2: WG 3: ABA
4: HEX Cur. : 1
Input Door Num: H
Range: 001 ~ 254
Current Data: 001
#
Input Door Num: L
Range: 001 ~ 254
Current Data: 001
#
Succeeded!
