Installation
Pi20
Rev. B 09/2011
19
Figure 7: Field of View Calculator
5.5
Focusing
After the camera has been mounted, it is important to make sure that the optimum focus has been
established for the given mounting distance. It is important to focus the camera correctly to obtain the
sharpest image of the target you wish to view.
The camera with remote focus (…RC) can be set via the TSA software.
The camera with manual focus (…MA, …MB) can only be focused manually on the front of the
camera.
Figure 8: Focusing the Camera with Manual Focus (…MA, …MB)
It should be noted that if the focus changes or the camera is moved from its installed location, the user
must make sure that a new focus setting has been achieved.
Clockwise turning:
focal point goes far
Counter-clockwise turning:
focal point comes near
Содержание ThermoView Pi20
Страница 1: ...ThermoViewTM Pi20 Fixed Thermal Imager Operating Instructions Rev B 09 2011 55301...
Страница 41: ...Accessories Pi20 Rev B 09 2011 41 Figure 18 Digital Input Wiring Figure 19 Relay Output Wiring...
Страница 43: ...Accessories Pi20 Rev B 09 2011 43 Figure 20 Analog Output Wiring Figure 21 Digital Output Wiring...
