Accessories
44
Rev. B 09/2011
Pi20
Figure 22: Digital Input Wiring
7.7.1
Changing the Output Type
The output type of the module 6024 is determined by the setting of internal jumpers on the analog
board. The default jumper setting is <Current Signal>. To change the analog output to <Voltage
Signal>, you have to open the module and set the jumpers J7-J8 for the analog output AO0 and J9-J10
for the analog output AO1, as illustrated in the figure below:
Figure 23: Jumper Settings
I
V
Jumper Setting
for Voltage Signal
I
V
Jumper Setting
for Current Signal
Содержание ThermoView Pi20
Страница 1: ...ThermoViewTM Pi20 Fixed Thermal Imager Operating Instructions Rev B 09 2011 55301...
Страница 41: ...Accessories Pi20 Rev B 09 2011 41 Figure 18 Digital Input Wiring Figure 19 Relay Output Wiring...
Страница 43: ...Accessories Pi20 Rev B 09 2011 43 Figure 20 Analog Output Wiring Figure 21 Digital Output Wiring...
