Accessories
40
Rev. B 09/2011
Pi20
7.6
Digital Input / Relay Output Module
The module interfaces to DTPi software only.
Type
6060
Digital Input
Channels
6
Dry contact
low level: close to GND
high level: open
Relay Output
Channels
6
Contact rating (resistive)
120 V @ 0.5 A (AC)
30 V @ 1 A (DC)
Type
form A (normally open)
Maximum switching rate
20 operations / minute
Ethernet Communications
LAN
10/100 Base-T (X)
LAN cable length
max. 100 m (328 ft)
Factory default IP address
192.168.200.241
Factory default gateway
255.255.255.0
For changing the network settings, see section 9.3
General
Power
10 to 30 V
DC
Power consumption
2 W @ 24 V
DC
Connectors
1 x RJ-45 (LAN)
Plug-in screw terminal block (I/O and power)
Isolation voltage
2 kV
DC
Operating temperature
-10 to 70°C (14 to 158°F)
Storage temperature
-20 to 80°C (-4 to 176°F)
Operating humidity
20 to 95% RH, non-condensing
Storage humidity
0 to 95% RH, non-condensing
Dimension
70 x 120 x 30 mm (2.8 x 4.7 x 1.2 in)
Mounting
wall or DIN rail mounting
Содержание ThermoView Pi20
Страница 1: ...ThermoViewTM Pi20 Fixed Thermal Imager Operating Instructions Rev B 09 2011 55301...
Страница 41: ...Accessories Pi20 Rev B 09 2011 41 Figure 18 Digital Input Wiring Figure 19 Relay Output Wiring...
Страница 43: ...Accessories Pi20 Rev B 09 2011 43 Figure 20 Analog Output Wiring Figure 21 Digital Output Wiring...