F. Warranty Conditions
Raytech GmbH Switzerland shall at their option and expense, repair, replace or newly
provide any parts or services that prove to be defective within the warranty limitation period-
irrespective of the operating time of the test equipment provided that the cause of the defect
occurred prior to the time at which the risk was passed.
Warranty claims are subject to a warranty limitation period of 24 months from the date of
shipment.
The purchaser is obligated to immediately notify Raytech GmbH Switzerland in writing form
of any defects of the supplied test equipment.
Raytech GmbH Switzerland must always be given the opportunity to rectify a defect within a
reasonable time. The purchaser shall grant an adequate time within the test equipment shall
be repaired.
Raytech GmbH Switzerland covers the costs associated with the repair of the defect.
Especially the costs for the material and work. Cost for sending the faulty test equipment
shall be borne by the purchaser. Raytech GmbH Switzerland shall not be liable for material
damage, or financial loss due to the loss of production, loss of data, loss of information, data
or interest, regardless of their legal basis.
Warranty claim rights on replacement parts as well as repair of defective parts shall expire
after 12 months.
Warranty limitation period shall be extendable according to the price list. The purchaser has
the right to extend the warranty period by purchasing additional warranty years.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper and unauthorized
modifications or misuse and abuse of the product, negligence, alteration, modification, faulty
installation by the customer, customer’s agents or employees. Attempted or actual
dismantling, disassembling, service or repair by any person, firm, or corporation not
specifically authorized in writing by Raytech GmbH Switzerland.
Defects caused by or due to handling by carrier, or incurred during shipment, trans-shipment,
or other move. Inadequate maintenance by the customer, second source supplied software
or interfacing, operation outside the environmental limits, or improper site preparation.
Exclusive remedies provided herein are the customer’s sole and exclusive remedies.
Raytech Switzerland shall not be liable for any damages resulting from the use of this
equipment whether direct, indirect, special, incidental, or consequential damages, or whether
based on contract, tort, or any other legal theory.
NO OTHER WARRANTY IS EXPRESSED OR IMPLIED.
Arbitration
All disputes arising out of or in connection with the contract between the purchaser and
Raytech GmbH Switzerland and including those regarding the legal validity of this contract
and this arbitration clause shall be settled out of court and shall be referred to arbitration for
final decision.
Any disputes between the purchaser and Raytech GmbH Switzerland shall be settled
according to the rules of settlement and arbitration of the chamber of commerce in Zurich by
one or more arbitrators appointed also according to the rules of arbitration of the chamber of
commerce in Zurich Switzerland.
90100.2.10 Instruction Manual TR-MARK III
Page 66 of 68
