8.1.2 Further Options of Main screen
8.1.2.1 Change Test Voltage
Let’s have a look to further measurement settings provided by main screen.
TR-MARK III offers three Test Voltage settings for common transformers. To change Test
Voltage, just touch the button with the ‘Ut=…’ on the upper right. A selection window
appears.
Then select new Test Voltage
by touching the button with the Test Voltage of your choice
written on it.
8.1.2.2 Continuous Measurement and Stop Measurement
On TR-MARK III a running measurement is indicated by a progress bar. In this stage the
buttons in the lower part of the display disappear, and the two buttons
Cont
and
Stop
appear. Touching Cont (continuous) will lead to permanent measurement of the marked
phase.
In continuous mode, the ‘cont’ button will convert to a ‘Next’. Use this button to switch to the
next phase and stay in continuous mode.
Stop will immediately stop measurement in common and continuous mode.
90100-2.20 Instruction Manual TR-MARK III 250V
Page 23 of 68
Progress Bar
Continuous and
Stop buttons
Tip here
