Raytec WARRIOR 24, Руководство по установке, Страница: 7 / 10

UK / Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
www.raytecled.com 7
3. Maintenance
1. It is essential that all WARRIOR units are maintained in accordance with local
standards.
2. IMPORTANT . No modifications are permitted to the unit, all spare parts must
be purchased from the manufacturer, unauthorized modifications or spare parts
will invalidate certification and make the equipment dangerous.
3. Isolate the WARRIOR unit from the mains supply and allow to cool before
carrying out any maintenance work.
4. The unit has 2 independent power supplies, in the event that a power supply
needs to be replaced the cables to the LED and mains terminal block will need
to be disconnected, the four M6 bolts released the power supply can then be
removed. Fitting a new power supply is a reversal of the above procedure.
5. Disposal of packaging, WARRIOR unit and old LED assemblies should be
carried out in accordance with national regulations.