UK/Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Toll Free: +1 888 505 8335
5
Easy Set up
1.
Fit cameras inside the VAR2-VLK.
2.
Configure the VAR2-VLK.
3.
Mount VAR2-VLK to column or wall. (See accessories for
suitable brackets).
4.
Mount the PSU (optional extra).
5.
Route Cables from Camera Housing to PSU and terminate.
6.
Optional: Set-up adjustments.
7.
Optional: Adjust beam angle of illuminators.
8.
Adjust alignment.
9.
Position illuminator pointing towards scene.
10.
Adjust vertical angle. Adjust horizontal angle via Adaptive
Illumination (AI) (if required).
11.
Tighten all fixings.
12.
Apply power.
For full description of optional adjustments – see sections below.
Note :
The external cables cannot be replaced. If they are damaged and the
customer is unable to shorten and re-use the cables, the unit must
not be powered.
6
Factory Default Settings
Programming Mode
35˚ Beam Angle ILS (Interchangeable Lens System)
Max 100% Power
Telemetry Input – active (closed)
Photocell sensitivity – MID
Status LEDs – ON, No PIN set
LED illuminator
Bracket
Adaptive
illumination (AI)
