Raytec PULSESTAR VCT6 Series, Руководство по установке

Страница: 40 / 41

39
11
Reference information
This section gives the electrical ratings and details of any restrictions on the use
of your VCT6. Event and error codes are also listed.
11.1
Ratings and restrictions
The electrical ratings for the connections are as follows:
Signal Rating
Power input: The VCT6 operates
from either a 12V or a 24V supply. 11.0V DC minimum to 26.4V DC
maximum. Maximum ripple 10%.
Trigger input Opto-coupler input: 0V to 2V is
logic 0, 5V to 24V is logic 1.
Trigger output
Opto-coupler transistor
output: maximum
switched voltage V
CEO
=
24V.
The VCT6 has the following restrictions on its operation:
The minimum delay for the light pulse output is approximately 2μs.
When using the re- trigger delay, the minimum delay is approximately 5μs.
For pulse widths of less than approximately 100μs, fault detection does not
operate.
11.2
Event codes
Event No Reason
1 to 127 An error has occurred. The error code is given by the
event number.
130 The temperature of the light is too high and operation
has been stopped.
148 The allowed duty cycle is now normal (that is, after event
149).
149 The allowed duty cycle has been reduced due to high
internal temperature.