RAYTAC MDBT42Q-AT-UART-M, Руководство пользователя

Страница: 11 / 29

No. Command Description
(37) AT+CONNECTPATTERNnnnnffff
Set LED connecting pattern (Hex) , where
n = time when LED on, f = time when LED off
e.g. 0x0064 (min. 100ms)
0x1388 (Max. 5,000ms)
0x00000000 (off)
0xFFFFFFFF (on)
(38) AT+SCANOLDPATTERNnnnnffff
Set LED pattern for scanning paired device (Hex) , where
n = time when LED on, f = time when LED off
e.g. 0x0064 (min. 100ms)
0x1388 (Max. 5000ms)
0x00000000 (off)
0xFFFFFFFF (on)
(39) AT+SCANNEWPATTERNnnnnffff
Set LED pattern for scanning all devise (Hex) , where
n = time when LED on, f = time when LED off
e.g. 0x0064 (min. 100ms)
0x1388 (Max. 5000ms)
0x00000000 (off)
0xFFFFFFFF (on)
(40) AT+SERIALNOnnnnnnnn
Set serial number
e.g. AB000001, fixed 8-character length
(41) AT+RESPONSEDIS
Disable response when sending “write” command
(42) AT+RESPONSEEN E
nable response when sending “write” command
(43) AT+DISCONNECT Terminate the connection
(44) AT+RSSITHRESHOLDnnn
Set RSSI threshold for scanning all devices (Ascii),
e.g. -69 (min.); -29 (Max.)
(45) AT+BEACONINFODIS Disable scanning beacon (31 bytes)
(46) AT+BEACONINFOEN
Enable scanning beacon (31 bytes)
When AT+BEACONINFO EN is set, the device become a
BEACON SCANNER only. If you want to exchange data,
please set
“AT+BEACONINFO
DIS
”.
(47) AT+COMPANYIDdddd
Set company ID for beacon (Hex) ,
e.g. 0x004C (for Apple ID)