- 12 -
1. Determine bracket mounting place
to be fixed using this Positioning
cardboard.
2. Drill holes in the wall for the M8
expansion screw anchors, which
depth should be at least 50 mm.
Tighten the screws to a torque
around 2.5 N
∙
m.
3. Fasten the battery to bracket, fasten
the holes with M6 screws with
2.0N
∙
m roughly.
4. Meanwhile, two or four batteries
could be installed by theses brackets.
Note: if more than 4 batteries installed, a cabinet recommended to be selected for
the battery’s stable.
5.3.1.2 Ground installation
Meanwhile, RT-5100S battery also could be installed on floor, the installation step
as following:
1. Fix the bracket to battery’s mounting
holes one by one.
