Rayonex Rayocomp PS 10, Руководство пользователя

Страница: 24 / 72

4.2.3 Automatic programme sequence when using an RAH ‘Green Card’ Page 24
4.2.3 Automatic programme sequence by using a RAH ‘Green Card’
In chapter 4.1.6, the advantages of an RAH ‘Green Card’ have already been
described. Under the menu item “Direct”, an RAH ‘Green Card’, stored with
frequency values or RAH-programmes, can be used for an automatic
harmonising sequence. Our principal object is, that people, who want to use
this device for harmonisation, can do this in a very simple way.
For the automatic programme sequence under the menu item “Direct”, which
is displayed immediately on switching on the device, you have to do the
following:
1. Switch on the device and connect it with the detectors
2. Insert the stored RAH ‘Green Card’ into the memory card slot
3. Wait until the data have been loaded, then unplug the card
4. The automatic harmonisation sequence begins
At first, the fundamental frequency values, stored on the RAH ‘Green Card’,
are set-up. The display shows:
After the fundamental frequency
values have been set-up one after the
other, the automatic harmonisation
with the loaded RAH programmes with
their individual stored harmonisation
times begins.
If only RAH-programmes were loaded
from the RAH ‘Green Card’, only RAH-
programmes will be harmonised. This
is also valid for fundamental frequency
values. In the automatic harmonisation
sequence of the RAH-programmes, the display shows:
The display shows “rAH”, so that you
know immediately, that RAH-
programmes are being harmonised
currently.
Note:
Using the sensor, each single
fundamental frequency value or RAH-
programme can be switched forward,
if, e.g., the sensor shows, that the
harmonisation has been finished
ahead of schedule.