DOC-S0508-1R14-IMEI02 • Technical Manual • Issue
5 |
P a g e
Chapter 2:
Technical Characteristics
2.1. Introduction
All
RAYNOR
RapidCoil™ doors have been engineered with a unique and patented door system
that leads the industry of High Performance doors.
RAYNOR
RapidCoil™ doors have the
following characteristics instilled them:
Sealing
Safety
Self-Reintroducing
High
Speed
Holding Power (wind load)
High
Cycle
RAYNOR
continuously develops its products to accurately meet the specific needs of every
sector of the door industry.
In the context of this policy, of continuous development of its product,
RAYNOR
reserves the right
to change the characteristics of its products or parts, without prior notice.
2.2. Specifications:
2.2.1. RC300 & 300HD
Application Type:
Exterior or Interior mounting applications
Maximum Dimensions:
W 18’-0” x H 18’-0”
Standard Opening Speed:
4’ per/sec
Optional Opening Speed:
Up to 8’ per/sec (size dependent)
Standard Closing speed:
4’ per/sec
Operation:
Driven door, no ballasts
Door post:
3 1/8”
x 1 9/16” x 1/8” Galvanized steel or Stainless steel
Inner Guide (Polyethylene):
PE-UHMW 1000, 22 x 40 mm
Drums and shafts:
Drive and Roll-up Drum Ø 102 mm, 14 gauge steel. Shaft Ø 25
mm solid steel with welded flanges.
Door Curtain Material:
27oz/sq yd PVC vinyl, 9 standard colors
Door Curtain temp range:
-22°F - 158°F
Reintroduction block:
Fixed to head unit
Motor:
1-2 horsepower 230/400 50 Hz 3 phase motor, IP65/NEMA4
Reduction:
7:1 Worm gear reduction, Size 50
Control Box:
NEMA 4X, Composite box (16” x 14” x 8”), UL labeled
Safety Devices:
Photo electric cell, WDD Bottom edge
Supply Power:
208-240 single or three phase, 480 three phase and 575 three
phase
2.2.2. Classification
In the United States there are no performance standards in place yet for High Performance
Doors. In future, with the help of such organizations as DASMA and with collaboration from the
