THE REMOTE CONTROL TRANSMITTER
The portable remote may be secured to a car sun visor
with the clip provided. Additional remote controls can be
purchased at any time for all vehicles using the garage.
If the battery has sufficient power, the light will glow and
the opener will operate when the remote push button is
pressed.
The 12 Volt battery should produce power for at least a
year. When the light is dim or doesn't come on, replace
the battery. If the transmission range lessens, check the
battery light.
TO CHANGE THE BATTERY: Slide the battery
compartment cover down. Remove original battery and
position new battery as directed.
KEY NO.
PART NO.
DESCRIPTION
KEY NO.
PART NO.
DESCRIPTION
1
41A4504-1
Remote Control case (housing
4
540RGD
Universal Receiver
only; circuit board not included)
Not Shown
2
10A14
12V Battery
Model 81RGD
Extra Remote Control
3
29C128
Visor clip
(Complete)
1
3
2
4
3
2
1
© 1995, The Chamberlain Group, Inc.
114A1687E
All Rights Reserved
Printed in Mexico
SET RECEIVER
TO MATCH REMOTE CONTROL(S) CODE
Pry open the front panel of receiver case with a coin or a
screwdriver.
1. Press and
hold the remote control push button.
2. Then press and release the "Smart" button on the
receiver. The adjacent indicator light will
flash once.
3. Release the remote control push button.
The opener will now operate when the push button on
either the receiver or the remote control is pressed.
Repeat Steps 1 -3 for each remote control that will be
used to operate the garage door opener.
NOTE: If the remote control push button is not held
down until the receiver indicator light flashes, the
receiver will not learn the code.
TO ERASE ALL REMOTE CONTROL CODES
• Press and hold the "Smart" code button on the
receiver panel until the indicator light turns off (about
6 seconds).
All the codes the receiver has learned
will be erased.
• Repeat Steps 1-3 to reprogram the receiver for each
remote control transmitter in use.
3
2
1
UNIVERSAL RECEIVER
Remote Control Transmitter
Push Button
Smart
Button
Indicator Light
UNIVERSAL RECEIVER
REPLACEMENT PARTS