CHAPTER 1: IMPORTANT
INFORMATION
Warning: Product installation and operation
• This product must be installed and operated in accordance
with the instructions provided. Failure to do so could result
in personal injury, damage to your vessel and/or poor
product performance.
• Raymarine highly recommends certified installation by
a Raymarine approved installer. A certified installation
qualifies for enhanced product warranty benefits.
Register your warranty on the Raymarine website:
Warning: High voltage
This product contains high voltage. Adjustments require
specialized service procedures and tools only available to
qualified service technicians. There are no user serviceable
parts or adjustments. The operator should never remove the
cover or attempt to service the product.
Warning: Input and output channels
• The router’s input and output channels enable creation
of a simple digital monitoring / control system. As device
connections are outside of Raymarine’s control the company
will not be held liable for damage or injury caused due to
incorrect connections.
• Input and output device connections should only be carried
out by a competent person familiar with vessel digital
switching systems.
• The Router’s output channels are rated at 200 mA and are
only intended to be connected to devices via standard
automotive relays.
• If in any doubt or for further advice please contact
Raymarine Technical Support.
Warning: Potential ignition source
This product is NOT approved for use in hazardous/flammable
atmospheres. Do NOT install in a hazardous/flammable
atmosphere (such as in an engine room or near fuel tanks).
Disclaimer
Raymarine does not warrant that this product is error-free or that it is
compatible with products manufactured by any person or entity other than
Raymarine.
Raymarine is not responsible for damages or injuries caused by your use or
inability to use the product, by the interaction of the product with products
manufactured by others, or by errors in information utilized by the product
supplied by third parties.
Product modifications
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF exposure
To be protected against all verified adverse effects, the separation distance
of at least 0.5 m (1.64 ft) must be maintained between the antenna of the
radio having maximum 5.84 dBi antenna gain and all persons.
5 GHz Wi-Fi band
The band 5150 MHz to 5350 MHz for this device is restricted to indoor use
only within all European Union countries.
9
