Raymarine ST40, Руководство по обслуживанию

Страница: 13 / 70

Chapter 1, ST40 Speed Instrument
ST40 Instruments Service Manual 83149-2 2-1
E22037
Chapter 1: ST40 Speed Instrument
Input/output signals
D4804-2
Connections to ST40 Speed instrument
BATT+ (Red)
BATT- (Screen)
STALK (Yellow)
SCREEN (Screen)
0VANA (Brown)
SPD (Green)
TEMP (White)
12V (Red)
Raymarine
Limited
Signal Description
STALK Intermittent streams of (nominal) 12 V pulses
BATT- 0 V
BATT+ Nominal 12 V dc supply
12V Approximately 11.2 V dc out
SPD With transducer attached, spinning paddle-wheel produces pulses
approximately 11.2 V in amplitude @ 5.5 Hz/Knot.
SCREEN 0 V
TEMP With transducer attached, voltage here is dependent on
temperature. Approximately 1.8 V at 0 degrees C.
OVANA 0 V
Refer also to the ST40 Speed circuit diagram .
Self-testing
Each ST40 instrument has built-in self-test functions to aid fault diagnosis.
To self-test an ST40 Speed instrument:
• Press the and keys simultaneously for 4 seconds, to access self-test mode,
then within 2 seconds, press the and keys together momentarily, to start
self-test stage 1.