Raymarine SmartPilot X5, Инструкция по установке и настройке

Страница: 46 / 76

38 SmartPilot X-5 Tiller & GP Tiller Installation & Setup Guide
AutoLearn
The next stage of the Seatrial is to carry out an AutoLearn routine. AutoLearn is a self-
learning calibration feature that automatically adjusts rudder gain, counter rudder and
AutoTrim for optimum performance for your boat.
If you need to return to manual steering at any time during an AutoLearn routine or any
other procedure, press the
standby
button. NEVER compromise vessel safety.
Carry out an AutoLearn as follows:
1. Ensure you have sufficient sea room to complete the AutoLearn:
2. Access the AUTOLEARN screen in Seatrial calibration as follows:
i. From Standby mode, hold down
standby
for 2 seconds, then press
disp
twice
to see the
SEATRIAL CAL
screen.
ii. Press
auto
to enter Seatrial calibration, then press
disp
four times to see the
AUTOLEARN screen.
3. Prepare to start the AutoLearn as follows:
• Steer straight ahead (rudder centered) and motor the boat at typical cruising
speed.
• If conditions are not calm, head into the wind and waves.
4. When you are ready to start the AutoLearn, press
+1
then
auto
.
WARNING: Ensure there is enough clear sea space
The AutoLearn process takes the boat through a number of
maneuvers, which can result in sudden, sharp turns, especially
when the AutoLearn function is run on more maneuverable
boats. Therefore, ensure there is a significant amount of CLEAR
SEA SPACE in front of the boat, before starting an AutoLearn
process.
At least 0.25 nm (500 m) of clear sea space
At least 0.04 nm (100 m)
of clear sea space
D10544-1
1 minute
(approximately)
Wind