Raymarine RS130 GPS, Руководство по установке

Страница: 7 / 40

Chapter 1: Introduction
Handbook information
This handbook describes how to install the Raymarine RS130 GPS
Receiver as part of a marine electronics installation.
This handbook includes information to help you:
• plan your installation and ensure you have all the necessary
equipment;
• install and connect the RS130 as a part of your system of
Raymarine electronics;
• conduct checks to ensure that the RS130 has been installed
correctly;
• obtain support if required.
This and other Raymarine product documentation is available to
download in PDF format from
www.raymarine.com .
Safety notices
Warning: Product installation and
operation
This product must be installed and operated in
accordance with the instructions provided. Failure to
do so could result in personal injury, damage to your
boat and/or poor product performance.
Warning: Switch off power supply
Ensure the boat’s power supply is switched OFF
before starting to install this product. Do NOT connect
or disconnect equipment with the power switched on,
unless instructed in this document.
Warning: Potential ignition source
This product is NOT approved for use in
hazardous/flammable atmospheres. Do NOT install in
a hazardous/flammable atmosphere (such as in an
engine room or near fuel tanks).
Warning: Product grounding
Before applying power to this product, ensure it has
been correctly grounded, in accordance with the
instructions in this guide.
Important information
Caution: Power supply protection
When installing this product ensure the power source
is adequately protected by means of a suitably-rated
fuse or automatic circuit breaker.
Caution: Service and maintenance
This product contains no user serviceable
components. Please refer all maintenance and repair
to authorized Raymarine dealers. Unauthorized repair
may affect your warranty.
Introduction 7