Raymarine RL70C, Руководство пользователя

Страница: 111 / 218

Chapter 5: Standard Chart Operations 97
Route Leg and Waypoint Information
➤
To display information about a route leg, move the cursor over the leg until the
letters RTE are displayed. A Route Leg data box such as the following is
displayed.
D4259-2
LEG 02 - 03
0°T 5.5nm
ROUTE NO.
ROUTE NAME
To remove the data box, move the cursor away from the route or press
CLEAR
.
➤
To display information about a route waypoint, move the cursor over the
waypoint until the letters
WPT
are displayed. The waypoint data box is
displayed, this box includes the route and waypoint number.
To remove the data box, move the cursor away from the route or press
CLEAR
.
Using Route Information to Review Your Passage Plan
You can view data for all the waypoints in the current route, or any saved route.
You select the route from the database list and the information is displayed in a
Route Information pop-up; the following details are provided for each
waypoint:
Position
Bearing (from previous waypoint)
Length of leg (from previous waypoint)
Total Length
Time (ETA or Elapsed)
Soft keys are provided to toggle the time between ETA or elapsed and to change
the Speed Over Ground (SOG) value; the ETA for each waypoint is calculated
using the selected SOG, so you can change the SOG to determine its effect on
your ETA.
The Review Your Passage Plan scenario in Chapter 2 provides a simple
example of how to use the route information.
➤
To display information about any route in the database:
1. Press the ROUTE soft key, followed by MORE , then press ROUTE LIST . The
route list is displayed. The grey selection bar indiates the selected route.
2. Use the trackpad to select the required route, then press the
ROUTE INFO
soft
key.
The Route Information pop-up is displayed, listing the waypoints in the
route and detailing bearing, length of each leg, total distance, and either the
estimated time of arrival (ETA) or the elapsed time.
Displaying Route
Information
ROUTE
LIST
ROUTE
INFO