Raymarine RL70C, Руководство пользователя

Страница: 195 / 218

Appendix B: Using the Auxiliary Junction Box 181
Appendix B: Using the Auxiliary Junction Box
to Connect a SeaTalk GPS and Differential
Beacon Receiver
Note: With the exception of the Raystar 114, when you use the following
Differential Beacon Receiver configurations, the receiver must be set to AUTO
MODE in the GPS Set-Up page. Manual selections will not be accepted. Refer
to Chapter 6 for details.
The recommended method of providing position, course over ground and speed
over ground information to the HSB displays is by connection to a SeaTalk
GPS. The HSB series chartplotter displays are supplied with an Auxiliary
Junction Box, whose main purpose is to make this connection easier. The
junction box has two flying leads, one with a SeaTalk plug for connection to the
display and the other lead is for connection to a 12V power supply (the display
does
not provide power for the GPS).
The following sections detail the connections to the Auxiliary Junction Box for
several different types of GPS, including a beacon receiver if fitted. Except for
Raystar 114, the differential beacon receivers used are Raytheon NRD-2A,
Apelco BR101 and the Autohelm Beacon Receiver.
The connections detailed in the following sections ensure that the GPS will
always operate in SeaTalk mode. Note that the Raystar 112LP must be the
SeaTalk version.
Appendix B:
Using the Auxiliary
Junction Box