Raymarine RD418HD, Руководство пользователя

Страница: 25 / 36

2.3 Post installation procedures
Before using the product, carry out the following:
• Mechanical checks.
• Switch on and initial setup.
Mechanical checks
Before switching on the HD Digital Radome Antenna:
• Ensure that:
– All securing bolts are fully tightened and the appropriate
mechanical locking washers are in place.
– All connections are securely made.
– All connecting cables and wires are secured and protected as
necessary.
• Ask your local Raymarine authorized installer to check the
installation.
Switch on & initial setup
Use the information given here in conjunction with the relevant
information in your multi-function display (MFD) documentation, to
switch on, and to carry out the initial checks and setup tasks.
1. Press and hold down the power key of your MFD until the unit
beeps.
The magnetron warm-up sequence should then start. When the
warm-up is complete, the unit should enter standby mode.
2. Use the appropriate soft key on your MFD to power on the HD
Digital Radome Antenna.
3. If necessary, at the MFD:
• adjust the MFD brightness.
• change the default language settings.
4. Ensure that all personnel are clear of the antenna, then switch
to transmit mode.
5. Carry out the radar operations described in the relevant MFD
Owner’s Handbook and check that all functions appear to be
satisfactory.
6. Check the bearing alignment to ensure that targets appear
at their correct bearing relative to the boat’s bow. Adjust the
alignment as necessary
7. Check the display timing before using the system for navigation.
Checking for interference
Post installation check
If you have installed any system aboard a boat or made other
changes to the boat’s electronic systems (radar, VHF radio etc.),
you need to check before casting off, that all electrical systems
operate satisfactorily without any undue electrical interference,
in order to conform with Electro Magnetic Compatibility (EMC)
regulations. To do this:
1. Ensuring it is safe to do so, turn on all electronic systems aboard
the boat.
2. Check that the electronic systems all operate satisfactorily.
Installation 25