Raymarine RC435i Скачать руководство пользователя страница 62

Страница: 62 / 128

RC435 and RC435i Chartplotters

Editing Waypoint Details

The name, symbol and position of a waypoint can be changed, either by
means of the cursor or via the Waypoint List.

Note:

The target waypoint cannot be edited.

➤

To edit a waypoint using the cursor:

1. Place the cursor over the waypoint.

2. Select

WAYPOINT OPTIONS

and press

ENTER

to display the Edit Way-

point function bar.

3. Select

EDIT WAYPOINT

. The Edit Waypoint function bar is displayed.

4. To edit the waypoint name, select

EDIT NAME

The

NAME WAYPOINT

window is displayed.

5. Use the trackpad to enter or edit the name as follows:

• Use trackpad left/right to move the cursor to the character to be

changed. Up to eight characters can be used.

• Use trackpad up/down to scroll through the characters.
• When editing is complete, press

ENTER

; the waypoint name is

updated and the window is removed

6. To edit the symbol, select

EDIT SYMBOL

The

SELECT SYMBOL

options are displayed.

7. Use trackpad left/right to highlight the desired symbol, then press

ENTER

D4673-1

D4674-1

Содержание RC435i

































































































































Результаты поиска

Содержание RC435i

Отзывы:

Похожие инструкции для RC435i

Бренды по названию

Популярные бренды

Raymarine RC435i, Руководство пользователя

Результаты поиска

Содержание RC435i

Отзывы:

Похожие инструкции для RC435i

Бренды по названию

Популярные бренды