manualshive.com logo in svg

Raymarine RayTech RNS 5.0, Руководство пользователя

Поделиться
Скачать
Raymarine RayTech RNS 5.0 Скачать руководство пользователя страница 12

4

RayTech RNS V5.0 - User’s Manual

If you do not agree to the terms and conditions of the license agreement, you may 
return the program within thirty (30) days of the date of purchase by following the 
instructions contained within the license agreement.

System integration

Raytech RNS V5.0 has been designed to work transparently with Raymarine SeaTalk 
data communications package, or any other device that outputs data in National 
Marine Electronics Association (NMEA) 0183 format. These protocols allow 
information such as heading, wind speed and direction, sea temperature and other 
information to be accessed and displayed within RNS. Information generated by RNS 
can also be displayed on your boat’s standard on-board instruments.

Technical accuracy

The technical information contained within this manual, to the best of our knowledge, 
was correct at the time of printing. However, Raymarine cannot accept liability for any 
inaccuracies or omissions it may contain.

In addition Raymarine’s policy of continuous product improvement may change 
specifications without notice. As a result Raymarine cannot accept liability for any 
differences between the product and the manual.

Copyright

Under copyright laws use of this manual is intended for the original licensee.

No portion of this manual may be reproduced or transmitted in any form by any means, 
electronic or mechanical, including photocopying, recording, or information storage 
and retrieval systems, for any purpose other than the licensee’s use, without the 
express written permission of Raymarine, and provided in the licensing agreement 
between you and Raymarine.

Содержание RayTech RNS 5.0

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды