Raymarine RayPilot 650, Руководство пользователя

Страница: 71 / 81

66 RayPilot 650 Control Unit - Owner’s Handbook
6
Adju
sti
ng Au
to
pil
ot
Setti
ng
s
6.2 Type 100/300 course computers
Accessing Calibration mode
You can only access Calibration mode from Standby mode:
1. With the autopilot in Standby mode, press and hold
STBY
for
16 seconds until the display shows a small
CAL legend
.
2. Press
AUTO
and
STBY
together to enter Calibration mode.
3. Press
AUTO
to scroll through the various calibration screens.
4. When you reach an item you wish to adjust, use the
▲
(
NAV
) and
▼
(
LIGHTS
) keys or course change knob to change the value.
5. When you have made all the required changes, press and hold
STBY
for 2 seconds to exit Calibration mode and save changes.
Note: To exit Calibration mode without saving changes, press
STBY
momentarily.
Calibration screens
When you use the RayPilot 650 with a Type 100/300 course
computer, the calibration screens appear in the following order:
Vessel type (vES tYP)
Vessel type should be set when commissioning the autopilot.
Note: When you select the vessel type, the autopilot will set
appropriate defaults for several other calibration settings.
Options
1 Displacement
2 Semi-displacement
3 Planing
4 Boat with I/O drive (stern drive)
81013_4.book Page 66 Wednesday, July 25, 2001 11:04 AM