Raymarine P70 Скачать руководство пользователя

Страница: 66 / 122

Caution: Major course changes

When making major course changes, the

trim on the boat may change substantially.

Due to this, the autopilot may take some

time to settle accurately onto the new

course.

Accidental gybes

The gybe inhibit feature stops the vessel from turning

away from the wind if you accidently AutoTack in the

wrong direction.

Note:

For the gybe inhibit feature to work, the

autopilot needs suitable wind data.

With gybe inhibit set to

Prevent Gybe

• you will be able to perform an AutoTack through

the wind.

• the autopilot will prevent the boat from performing

an AutoTack away from the wind.

With gybe inhibit set to

Allow Gybe

• you can perform an AutoTack through or away

from the wind.

Note:

Gybe inhibit feature can be changed from

the Sail Boat Settings menu:

Menu > Set-up >

Autopilot Calibration > Sail Boat Settings >

Gybe Inhibit

9.6 Power steer

Power steer mode enables you to use the rotary

controller of the p70Rs or a connected joystick to

directly steer the vessel on manual heading.
Power steer has 2 options:
• Proportional

— The rudder will behave in proportion to the

movement of the rotary control or joystick.

• Bang Bang (Joystick only)

— The rudder will move, and stay in the direction

the joystick is moved.

Engaging power steer mode

To engage

Power steer

mode:

1. Go to the

Mode menu

found in

Main menu >

Mode

2. Highlight

Power steer

and press

SELECT

You can change the type of steering at any time i.e.

Proportional or Bang Bang by going to the

Power

steer

settings in the

Drive settings

menu:

Main

menu > Set up > Auto pilot calibration > Drive

settings > Power steer

Note:

In order to use Bang Bang mode a

connected joystick is required, the p70Rs rotary

will only perform in Proportional mode.

p70 / p70R

Содержание P70



























































































































Результаты поиска

Содержание P70

Отзывы:

Похожие инструкции для P70

Бренды по названию

Популярные бренды

Raymarine P70, Инструкция по установке и эксплуатации

Результаты поиска

Содержание P70

Отзывы:

Похожие инструкции для P70

Бренды по названию

Популярные бренды