Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 363 / 504

24.1 Yamaha engine gateway selection
When the MFD is connected to Yamaha engines via a compatible gateway /
interface, engine related data can be displayed in the dedicated Yamaha app.
Engine gateway selection is performed as part of the Boat details settings
in the initial MFD start up wizard. The selection can also be changed in the
Boat details settings tab:
[Homescreen > Settings > Boat details > Engine
manufacturer] .
• If you have a compatible gateway interface, select [Yamaha] from the
Engine manufacturer options.
• If you have a compatible gateway that includes the Yamaha MFD HDMI
interface, select [Yamaha HDMI] from the Engine manufacturer options.
Compatible Yamaha gateways
The following gateways are compatible:
• The Yamaha app is compatible with Yamaha Command Link and
Command Link Pro when connected to the MFD via a Yamaha NMEA 2000
gateway or CL7 gauge.
• The Yamaha HDMI app is compatible with Yamaha Command Link and
Command Link Pro when connected to the MFD via a Yamaha Helm Master
EX 6YG gateway and MFD interface (MFDI).
24.2 Yamaha HDMI overview
The MFD will display the HDMI video input feed from the Yamaha MFDI.
Control is achieved using the Yamaha supplied handheld controller.
Please refer to the documentation that was supplied with your Yamaha
engine system.
24.3 Yamaha app overview
The [Yamaha app] enables you to view engine system data from a connected
Yamaha Command Link or Command Link Pro network.
Note:
• The Yamaha app will only display data when a compatible Yamaha
Command Link or Command Link Pro network is connected to the MFD
via a Yamaha NMEA 2000 gateway or CL7 gauge.
• The Yamaha app can only be displayed as a Fullscreen app page.
• The Yamaha app is pre-configured with a number of customizable data
pages.
• For each instance of the Yamaha app you can select which Data pages
you want to use; the Data page selection will persist over a power cycle.
Requirements
The Yamaha app is available when a compatible Yamaha Command Link or
Command Link Pro network is connected to the MFD via a Yamaha NMEA
2000 gateway (6YG-8A2D0-00-00) or CL7 display.
Note:
Do not use the Gateway module (6YG-8A2D0-00-00) and CL7 display
together on the same network.
Yamaha app
363