Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 236 / 504

• [Mode] — Chart app mode can be changed at anytime by selecting a mode.
For details of available chart modes refer to: p.154 — Chart modes
• [Weather layers] — Allows you to select the weather layers that you want
to display. For details refer to: p.236 — Weather layers
• [Data display limits] — Allows you to restrict the display data limits for the
sea surface temperature layer.
• [Reports] — Displays text based weather reports for your vessel current
location.
• [Animate weather] — Activates weather animation mode. For details refer
to: p.237 — Animated weather
• [Show legend] — Displays an onscreen legend for currently enabled layers.
• [Settings] — Provides access the chart app settings menu.. For details refer
to: p.244 — Weather mode settings menus
You can check when fishing data was last received / updated from the
[Subscription ] settings menu: [Menu > Settings > Subscription] .
17.3 Activating your SiriusXM receiver
Your MFD is compatible with the SR150 and SR200 SiriusXM receivers. Your
receiver must be activated before you can use weather mode on your MFD.
The following information is required to activate your SiriusXM receiver:
• Electronic Serial Number (ESN) — The ESN is printed on the product label
located on the underside of your SiriusXM receiver. You can also access
the ESN from the
[Weather] settings menu in the chart app: ( [Menu >
Settings > Subscription > Receiver ESN] ).
• Current billing information (if you already have a valid subscription).
• Desired subscription package.
1. Obtain your SiriusXM receiver’s ESN.
2. Visit the Sirius Marine Weather website:
http://www.siriusxm.com/sxmma-
rine , and choose a subscription package.
3. Follow the “Activate Now” link to activate your receiver online.
Alternatively, call 1–855–796–9847.
Once your SiriusXM receiver is activated weather mode will be available in
the chart app menu.
SR200 diagnostics mode
The SR200 diagnostic mode can be accessed from the audio settings menu
from the master MFD on the network. The diagnostics mode should be
referred to when liaising with Sirius product support.
1. Reset — Performs a factory reset and power cycle of the SR200.
2. Diagnostics mode — Displays the SR200’s diagnostic information.
17.4 Weather layers
The weather layers can be enabled and disabled from the [Weather layers]
menu: [Menu > Weather layers] .
The following weather layers are available in weather mode:
• [Weather radar] — For details refer to: p.238 — Weather radar layer
• [Cities] — For details refer to:
p.239 — Cities and Surface observation stations layers
• [Cloud top] — For details refer to: p.239 — Cloud top and Lightning layers
• [Lightning] — For details refer to: p.239 — Cloud top and Lightning layers
• [Sea surface temperature] — For details refer to:
p.240 — Sea surface temperature and Surface pressure layers
• [Storm cast] — For details refer to:
p.241 — Storm cast and Storm tracks layers
236