background image

Limited Warranty Certificate

Raymarine warrants each new Light Marine/Dealer Distributor Product to be of good materials and
workmanship, and will repair or exchange any parts proven to be defective in material and
workmanship under normal use for a period of 2 years/24 months from date of sale to end user, except
as provided below.

Defects will be corrected by Raymarine or an authorized Raymarine dealer.  Raymarine will, except
as

 

provided

 

below,

 

accept

 

labor cost for a period of 2 years/24 months from the date of sale to end user.

During this period, except for certain products, travel costs (auto mileage and tolls) up to 100 round
trip highway miles (160 kilometers) and travel time of 2 hours, will be assumed by Raymarine only
on products where proof of installation or commission by authorized service agents, can be shown.

Warranty Limitations

Raymarine

 

Warranty

 

policy

 

does

 

not

 

apply

 

to

 

equipment

 

which has been subjected to accident, abuse

or misuse, shipping damage, alterations, corrosion, incorrect and/or non-authorized service, or
equipment on which the serial number has been altered, mutilated or removed.

Except where Raymarine or its authorized dealer has performed the installation, it assumes no
responsibility for damage incurred during installation.

This Warranty does not cover routine system checkouts or alignment/calibration, unless required by
replacement of part(s) in the area being aligned.

A suitable proof of purchase, showing date, place, and serial number must be made available to
Raymarine or authorized service agent at the time of request for Warranty service.

Consumable

 

items,

 

(such

 

as:

 

Chart

 

paper,

 

lamps,

 

fuses,

 

batteries, styli, stylus/drive belts, radar mixer

crystals/diodes, snap-in impeller carriers, impellers, impeller bearings, and impeller shaft) are
specifically excluded from this Warranty.

Magnetrons, Cathode Ray Tubes (CRT), TFT Liquid Crystal Displays (LCD) and cold cathode
fluorescent

 

lamps

 

(CCFL),

 

hailer

 

horns,

 

and

 

transducers

 

are

 

warranted

 

for

 

1

 

year/12 months

 

from

 

date

of sale. These items must be returned to a Raymarine facility.

All costs associated with transducer replacement, other than the cost of the transducer itself, are
specifically excluded from this Warranty.

Overtime premium labor portion of services outside of normal working hours is not covered by this
Warranty.

Travel cost allowance on certain products with a suggested retail price below $2500.00 is not
authorized.

 

 When/or

 

if

 

repairs

 

are

 

necessary,

 

these

 

products

 

must

 

be

 

forwarded

 

to

 

a

 

Raymarine

 

facility

or

 

an

 

authorized

 

dealer

 

at

 

owner’s

 

expense

 

will

 

be

 

returned

 

via

 

surface

 

carrier

 

at

 

no

 

cost

 

to

 

the

 

owner.

Travel

 

costs

 

other

 

than

 

auto

 

mileage,

 

tolls

 

and

 

two

 

(2) hours travel time, are specifically excluded on

all products. Travel costs which are excluded from the coverage of this Warranty include but are not
limited

 

to:

 

taxi, launch

 

fees, aircraft

 

rental, subsistence, customs, shipping and communication charges

etc. Travel costs, mileage and time, in excess to that allowed must have prior approval in writing.

TO THE EXTENT CONSISTENT WITH STATE AND FEDERAL LAW:
(1) THIS WARRANTY IS STRICTLY LIMITED TO THE TERMS INDICATED HEREIN, AND
NO OTHER WARRANTIES OR REMEDIES SHALL BE BINDING ON RAYMARINE
INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABLE OR
FITNESS FOR A PARTICULAR PURPOSE.
(2) Raymarine shall not be liable for any incidental, consequential or special (including punitive or
multiple) damages.
All Raymarine products sold or provided hereunder are merely aids to navigation. It is the
responsibility of the user to exercise discretion and proper navigational skill independent of any
Raymarine equipment.

Содержание L365




















































































Отзывы:

Похожие инструкции для L365