Raymarine Element 7 HV, Руководство по установке

Страница: 40 / 82

Caution: Transducer cable
• Do NOT use the transducer cable to lift or suspend the transducer; always
support the transducer body directly during installation.
• Do NOT cut, shorten, or splice the transducer cable.
• Do NOT remove the connector.
If the cable is cut, it cannot be repaired. Cutting the cable will also void the
warranty.
Cable routing
Cable routing requirements for the transducer cable.
Important:
To avoid interference, the cable must be routed as far away from VHF radio antenna devices
and cables as possible.
• Check that the cable is long enough to reach the display it will be connected to. Optional extension
cables are available, if required.
• Ensure there is enough slack in the transducer cable, at the transducer end, to allow the transducer
to pivot up and down during adjustment.
• If you intend to route the cable through the transom then you should use the supplied escutcheon
plate to cover the hole..
• Secure the cable at regular intervals using the supplied cable clips.
• Any excess cable should be coiled up at a convenient location.
40