Raymarine Element 7 HV, Руководство по установке

Страница: 39 / 82

HV-300THP-P and HV-300THP-S (split pair) connection
1. Extension cable (supplied with split pair sets of transducers).
2. Y-cable (supplied with split pair sets of transducers).
You can extend the length of transducer cables using a transducer extension cable.
HV–100 transducer extension cable
For best performance, cable runs should be kept to a minimum. However, for some installations it
may be necessary to extend the transducer cable.
A 4 m (13.12 ft) HyperVision™ transducer extension cable (A80562) is available
It is recommended that a maximum of one cable extensions is used, with the total cable length
not exceeding 10 m (32.81 ft).
Note:
The HyperVision™ transducer extension cable can only be used to connect a HV series transducer.
HV–300 transducer extension cable
For best performance, cable runs should be kept to a minimum. However, for some installations it
may be necessary to extend the transducer cable.
A 4 m (13.12 ft) HyperVision™ transducer extension cable (A80562) is available
It is recommended that a maximum of one cable extensions is used, with the total cable run to
each transducer not exceeding 6.3 m (20.67 ft).
Note:
The HyperVision™ transducer extension cable can only be used to connect a HV series transducer.
Connections 39