Raymarine E-Series, Руководство по установке

Страница: 46 / 112

Transducer connection — Minn Kota transducer
D12259-2
4
2 3
1
1. 600 W sonar variant MFD
2. Minn Kota transducer adaptor cable (A62363)
3. Minn Kota transducer cable
4. Minn Kota transducer
For further information regarding sonar module
installation (including power connection and
mounting), refer to the installation instructions
supplied with the sonar module.
Sonar variant multifunction displays
600 W sonar variants
CHIRP DownVision TM
variants
a67 a68
a77
a78
a97 a98
a127 a128
c97 eS78
c127 eS98
e7D eS128
e97
e127
eS77
eS97
eS127
Important software requirements for multiple
sonar systems
If your system includes more than one source of
sonar data you must ensure that any CP300 or
CP450C sonar modules are running software version
v4.04 or later.
This applies to systems which include:
• Any number of MFD(s) with an internal sonar
module plus a CP300 and / or CP450C sonar
module; or
• No MFD(s) with an internal sonar module, but
more than one CP300 or CP450C sonar module.
This does NOT apply to any systems that do NOT
include a CP300 or CP450C sonar module.
Note: For software downloads and instructions
on how to update the software for your product(s),
visit
www.raymarine.com/software .
4.12 Radar network connection
Radar units are connected to the SeaTalk
hs
network,
usually via a Raymarine ® network switch. On
smaller systems the Radar may be connected
directly to the display’s network connection.
Radar connected via network switch
D12252-3
4
2
1
5 6
3
1. Radar scanner
2. Raymarine ® network switch
3. MFD
4. RayNet Radar cable
5. VCM (Voltage Converter Module) — (required
for Open Arrays)
6. Power connection
Radar connected directly to the display
D12253-3
4
1
2
3
1. Radar scanner
46 a Series / c Series / e Series installation instructions