Raymarine CP370, Руководство по установке

Страница: 73 / 102

Possible causes Possible solutions
can cause the Fishfinder applications to stop scrolling or
the unit to reset/turn off), replace if necessary.
Transducer location • Check that the transducer has been installed in accordance
with the instructions provided with the transducer.
• If a transom mount transducer is mounted too high on
the transom it may be lifting out of the water, check that
the transducer face is fully submerged when planing and
turning.
Transducer kicked-up If the transducer has a kick-up mechanism, check that it has
not kicked up due to hitting an object.
Damaged or fouled transducer Check the condition of the transducer ensuring it is not
damaged and is free from debris / fouling.
Damaged transducer cable Check that the transducer cable and connection is free from
damage and that the connections are secure and free from
corrosion.
Turbulence around the transducer
at higher speeds may affect
transducer performance Slow vessel speed and recheck.
Interference from another
transducer 1. Turn off the transducer causing the interference.
2. Reposition the transducers so they are farther apart.
Unit power supply fault Check the voltage from the power supply, if this is too low it
can affect the transmitting power of the unit.
System checks and troubleshooting
73