Raymarine C140w Скачать руководство пользователя страница 158

Страница: 158 / 222

Example screen with range and range shift used to view the seabed
at a depth range of 40–80 ft

Changing the fishfinder depth range

You can choose from either:

• an

automatic

adjustment whereby the display automatically show

the shallowest required range.

•

manual

adjustment of the depth range, up to the maximum depth

displayed on the scrolling bottom and A-Scope images.

Changes to the range affect all fishfinder windows.

1. Press the

RANGE

button.

2. Toggle to AUTO or MAN using the

RANGE

softkey.

3. Use the rotary controller to adjust the depth range.
4. Press

Using fishfinder range shift

The DSM automatically adjusts the display to keep the bottom in
the lower half of the display window. Alternatively you can shift the
image within the current range. Changes to the range shift are
reflected in all fishfinder windows.

1. Press the

RANGE

control to open the range toolbar.

2. Press the

RANGE

softkey repeatedly until the MAN option is

selected.

3. Press the

RANGE SHIFT

softkey.

4. Select your desired setting using the trackpad.
5. Press

158

C-Series Widescreen user reference

Содержание C140w































































































































































































































Результаты поиска

Содержание C140w

Отзывы:

Raymarine C140w, Руководство пользователя, Страница: 158 / 222

Результаты поиска

Содержание C140w

Отзывы: